homemanualcalctoolpartnerslinkscontact
IntroductionEmpirical MethodsPC Overtopping
Neural Network


The CLASH Neural Network Generic Overtopping Prediction Tool

The application NN_OVERTOPPING was developed during the European Community’s fifth framework contract EVK3-2001-00058 CLASH (Crest Level Assessment of Coastal Structures by full scale monitoring, neural network prediction and Hazard analysis on permissible wave overtopping.)

The predictions based on the Neural Network can be used for the conceptual design of coastal structures; they may not be used in the final design stage, since the results should be verified based on dedicated physical model tests for the particular wave conditions and structure geometry of the structure to be built. The predictions are based on a data-set based on small-scale physical model tests; the predictions are to some extent affected by model effects, scale effects, limited accuracy of measurement equipment, limited accuracy of wave generation techniques, inconsistencies in the data-set, and lack of data in certain fields of application. Although reliability levels are given in addition to the predictions, these reliability levels do not account for most of these influences. Therefore, the Neural Network predictions may only be used as first estimates of mean overtopping discharges.

The Neural Network, accompanying documentation and current user licence are available below.

click to download

Please Note:
Use of NN_OVERTOPPING assumes that the user has read and understood the accompanying documentation. The files are the original CLASH files and were not devolved nor enhanced as part of EurOtop.

 

 

Disclaimer

These methods and tools are provided free of charge and can assist in establishing preliminary predictions for overtopping discharges for the structure types discussed in the EurOtop manual. They are not intended to be used for detailed design or assessment of structures subject to wave overtopping. It is recommended that detailed design or assessment of any structure use hydraulic model testing to verify the overtopping discharges where this is practicable. Use of the tools and methods available on this website assumes that the user has read and understood the EurOtop - Wave Overtopping of Sea Defences and Related Structures: Assessment Manual.

HR Wallingford Ltd, the Environment Agency and the EurOtop partners ("the Partners") shall not liable for the performance of a structure which is based upon the output of this website nor shall the Partners be liable for inaccuracies in the output from any use of the methods and tools provided. The Partners accept no liability for any loss or damage suffered by the user of the methods and tools provided or damage suffered by any third parties as a result of errors or inaccuracies in the methods the tools or their respective outputs.


Terms & ConditionsAbout this Website